How to Replace Garage Door Springs

Replacing garage door springs is not for the faint of heart. This project is best left to a professional, as it requires knowledge of how the door works and specific tools to complete the job safely. However, if you’re feeling up to the task, this guide will walk you through everything you need to know to replace your garage door springs.

The first step is to release the tension on the spring. To do this, you’ll need to disconnect the opener from the door so that you can work on it manually. Once the opener is disconnected, lift the door about halfway and prop it open with a stool or something similar. Be very careful when working with garage doors, as they are under a lot of tension and can be dangerous if not handled properly.

Next, locate the end of the spring that is attached to the bracket on the wall. Usually, there will be a winder pulley at this end that you can use to unwind the spring. Be sure to keep your fingers clear of the winding path so that you don’t get hurt if the spring should happen to snap. Once the spring is released, remove it from its bracket and set it aside.

Now it’s time to install the new spring. Start by attaching one end of the new spring to the bracket on the wall. Make sure that it is wound in the same direction as the old spring was. Once that end is secure, wind up the new spring using the winder pulley until it has tension on it. Then, attach the other end of the spring to the door and release it from its propped-open position.

If all went well, your door should now be opening and closing smoothly again. If not, check all connections to make sure they’re tight and try again. If your door still isn’t working right, or if you just don’t feel comfortable working with garage doors, give us a call and we’ll be happy to help!

Replacing garage door springs can be a dangerous job for anyone who isn’t a trained professional. If your door isn’t opening or closing smoothly, or if you just want peace of mind knowing that everything is in good working order, give us a call today. We’re always happy to help!